Paraffin melting
Paraffin melting
The devices are designed for paraffin melting and grave candle refill and colouring the candles by immersion method. All our melters are equipped with a stainless steel bathtub, high quality control system with digital thermostat and fire protection. An optional equipment includes SSR semiconductor control, improving the level of reliability and security. The heating medium is thermal oil or water. Each device is insulated with ceramic or mineral wool. Larger constructions are fixed on swivelling wheels, braked.
Possible equipment, e.g.:
- replaceable bathtubs
- paraffin pumps
- mixers
- dosing devices
- insert weight measurement system
- paraffin refill control system
- system for maintaining a constant level of paraffin
- medium circulation pump
- drain valves
- shield
We design devices that meet individual needs – we invite you to contact us.
1 chamber melter of a total capacity of 60 L with a manual dosing unit
Non-replaceable bath of a circular cross-section, capacity of 60 L. Indirect heating system by using thermal oil. The device is insulated with mineral wool. Stainless steel outer sheathing. Installation on adjustable feet. The melter is equipped with a manual dosing device (without measuring the dose).
1 chamber melter of a total capacity of 600 L with cover
As the only device of this type on the market, similarly like the melter of 400 litres capacity, is equipped in a paraffin bath made in a seamless technology and with curved corners. This enables fast and comfortable cleaning, and lack of corners eliminates the remaining raw material, which simplifies the change of the raw material colour. The unique design of the bath prevents the raw material from getting into the heating medium or insulating wool, even in the event of spilling outside the chamber. The bottom of the bath is slightly inclined and displaced into the drain valve direction. The melter is equipped in a cover supported by gas actuators, that tightly close the chamber owing to the use of an edge seal. The drain valve is mounted on the longer side of the melter at 35 cm height from the floor.
1 chamber paraffin melter – capacity of 1000 L, rectangular chamber
1 non-replaceable chamber, capacity of 1000 litres, made of stainless steel. The device is controlled by a digital temperature regulator with a temperature sensor immersed in oil, equipped with an additional paraffin temperature digital indicator and a safety thermostat. The heaters are switched on by a SSR semiconductor – increasing the reliability and working safety of the device, and enabling application of an accurate algorithm for paraffin temperature control. Indirect heating system by using thermal oil. The melter is equipped with a stainless steel agitator with inverter and overload coupling. The device is insulated with mineral wool and plated with stainless steel sheet. The device is equipped with weighting system mounted in feet together with a digital weight indicator. Segmental cover of the bath. Heaters power 14,4 kW, supply voltage 400V.
1 chamber paraffin melter, capacity of 30 L - equipped with rolls for a wick soaking
The melter is equipped with uplifted rolls leading a wick, enabling its soaking with paraffin. The device is entirely made of stainless steel, and the chamber of 30 L capacity in seamless technology with curved corners. Controlled by a digital temperature regulator and equipped with a safety thermostat. The heater is switched on by a SSR semiconductor. Indirect heating system, without thermal oil – the heater is mounted under the bottom of the bath and – without a contact with paraffin. Heater power 1,5 kW, supply voltage 230 V. Working temperature up to 900C. The melter is insulated with ceramic wool and plated with stainless steel sheet.
1-chamber melter 100l
Non-replaceable bathtub of a circular cross-section, capacity of 100 litres, made of stainless steel. Indirect heating system by using thermal oil. The device is insulated with mineral wool. Stainless steel outer sheathing. Installation on swivel wheels or fixed feet. Possible to be made with a rectangular bathtub. Possibility to arrange another split configuration. Optional equipment includes a cover, an agitator, a thermal oil circulation pump, a paraffin pump or a dosing device, as well as a paraffin weight measuring system.
10 chamber melter – circular tanks of a total capacity of 30 L each
The melter is equipped with 10 replaceable chambers of a circular cross-section, stainless steel. Each chamber is immersed in oil heated by the electric heaters. The device is controlled with a digital temperature regulator. The melter is insulated with mineral wool and plated with stainless steel sheet. Installation on breaking swivelling wheels. Optionally equipment includes a cover, an agitator, a thermal oil circulating pump, paraffin pump or dosing device, and paraffin weight measuring system.
2 chamber melter of a total capacity of 400 L
2 replaceable chambers of rectangular cross-section, capacity of 200 L each. Indirect heating system by using thermal oil. The device is insulated with mineral wool. Stainless steel outer sheathing. Installation on swivelling wheels or fixed feet. Optional equipment includes a cover, an agitator, a thermal oil circulating pump, paraffin pump or dosing device, and paraffin weight measuring system.
6-chamber melter – circular containers
6-chamber melter – circular containers with a dosing device
Paraffin granulator melter
- Thermal oil heaters – 2 pieces on each shorter side of the device of a total power of 14,4 kW;
- spraying lath, 2 row, 140 and 70 holes in each row, equipped in closing flaps, nozzles, driven by pneumatic actuators;
- electrically heated spraying lath;
- safety thermostat;
- paraffin drain valve;
- bath fixed on feet;
- paraffin sensor.
1-chamber melter 400l
As the only device of this type on the market, similarly to the 600 litre melter, it is equipped with a paraffin bathtub made in seamless technology and without corners, which allows quick and convenient cleaning. Lack of corners eliminates the material remaining there, and enables easy switching from one colour of raw material to another. This special design of the bathtubs prevents the raw material from reaching the heating medium or insulation wool, even if the paraffin is spilled outside the chamber. The bottom of the bathtub is slightly inclined and pressed towards the drain valve.
3 - chambers melter of a total capacity of 600L- with 2 dosing units
Non-replaceable seamless bathtub. Three non-replaceable chambers, capacity of 200 litres each, were obtained by inserting stainless steel partition sheets. Indirect heating system by using thermal oil. The device is insulated with mineral wool. Stainless steel outer sheathing. Installation on swivel wheels or fixed feet. Possibility to arrange another split configuration. Optional equipment includes a cover, an agitator, a thermal oil circulation pump, a paraffin pump or a dosing device, as well as a paraffin weight measuring system.
1-chamber melter 400l – with a dosing device
1-chamber melter 600l
As the only device of this type on the market, similarly to the 400 litre melter, it is equipped with a paraffin bathtub made in seamless technology and without corners, which allows quick and convenient cleaning. Lack of corners eliminates the material remaining there, and enables easy switching from one colour of raw material to another. This special design of the bathtubs prevents the raw material from reaching the heating medium or insulation wool, even if the paraffin is spilled outside the chamber. The bottom of the bathtub is slightly inclined and pressed towards the drain valve.
1-chamber melter 600l – with a paraffin pump
1-chamber melter 600l – with a dosing device
6-chamber melter – square containers
2-chamber melter – with a paraffin pump
4-chamber melter
Melter 3+1
30l melter
It is designated for melting of decorating masses, refill for decor applications or small amounts of paraffin.
Melter for candles colouring
It is used in automatic lines for Production of candles from pressed granules.