Paraffin moulds, hydraulic presses
Paraffin moulds, hydraulic presses
Hydraulic presses for crushing paraffin granules, powders and loose substances are mainly used for the production of paraffin moulds and paraffin candles bodies. The press may be equipped with 1, 2, 4, 6, 8 or even 12 sockets depending on the Customer's needs, - this means that after one pressing cycle, 1 to 12 moulds will be received. Additional sets of removeable equipment allow to convert the machine for the production of a different reference. In automatic presses, the entire process is controlled by a PLC microprocessor.
AUTOMATIC PRESSES
All activities, such as filling the bushing with granulate, pressing and pushing the product are performed automatically without user’s further action. The cycle is constantly repeated, and the moulds are placed directly on the table or conveyor belt. The control is carried out by hydraulic solenoid valves. These machines are often equipped with a granulate vacuum conveyor, ensuring uninterrupted supply of raw material.
SEMI-AUTOMATIC PRESSES
Pressing and pushing of the product are performed automatically. The bushings are, on the other hand, filled in manually by using a suitable scooping shovel or a manual drawer. Semi-automatic machines work in a single cycle, and the products are collected manually. The control is carried out by hydraulic solenoid valves. They are mainly used in specialised production, where the use of an automatic machine is too difficult and economically unjustified.
MANUAL PRESSES
The bushings are filled with a scooping shovel. Pressing and pushing of the product is controlled manually by a hydraulic rod splitter. The products are also collected manually. These are the simplest and the most universal machines in our offer because of an easy
conversion and the possibility of pressing the bodies of almost any size and shape, e.g. cylinder, cuboid, sphere, egg, star, cone.
12-socket automatic hydraulic press
Adapted to an efficient production of paraffin moulds of small dimensions. It is equipped with a granulate vacuum conveyor and a conveyor belt that receives ready products.
Automatic 8-socket hydraulic press
The main model, and most often used by grave and paraffin candles manufacturers, combined with a wicking and cupping line. It is featured by a compact construction with relatively small dimensions and low demand for electricity.
Automatic 6-socket hydraulic press
This is an equivalent to an 8-nest press. This machine, however, allows the production of moulds with a larger diameter, up to Ø100mm.
Automatic 2-socket hydraulic press
It is mainly used for the production of non-standard products, used in various industries, not only among candles or grave candles manufacturers. The presented press model was used in the production of urinal toilet tablets. This machine is characterised by very high pressure and small size.
2-socket manual hydraulic press
It is intended mainly for the production of candle moulds with non-standard shapes, e.g. sphere, square, egg, star and cylinder. It is possible to convert it fast by implementing short production runs.
Individual projects
We undertake the design of non-standard presses for various industries – we invite you to contact us.